RESEARCH OF AUTOMATIC MODELLING ON 3D DIGITAL STRATIGRAPHIC FRAMEWORK BASED ON BORING DATA
-
摘要: 三维数字地层格架自动生成技术研究是对地质体三维自动建模的初步探讨。基于钻孔资料,通过数字化、三角剖分,地层对比等数值计算与非数值计算,把建模生成分解为垂直地层界面伸展方向与平行地层界面伸展方向两个相互独立的过程,采用线性插值法先自动模拟生成地层格架元,再依据格架元之间的数值关系进行模型整合形成地层格架体。Abstract: The research of automatic modelling on three-dimension (3D) digital stratigraphic framework is a preliminary approach to the 3D automatic modelling of geologic bodies.Based on doring data, the automatic modelling was divided into two processes independent each other in the perpendicular and parallel directions of stratigraphic interfaces by numerical and non-numerical calculation such as digitization, trigonometric division and stratigraphic correlation.At first, linear interpolation was used to model stratigraphic framework cells automatically.Then, the models of framework cells were conformed according to numerical relations among them so as to form stratigraphic framework bodies.
-
Key words:
- framework cell /
- automatic modelling /
- 3D digital stratigraphic framework /
- boring data
-
[1] 张庆春,等.盆地模拟技术的发展现状与未来展望[J].石油实验地质,2001,23(3):312-313. [2] 吴冲龙, 等.油气系统动力学的概念模型与方法原理——盆地模拟和油气成藏动力学模拟的新思路、新方法[J]. 石油实验地质,1998,20(4):319-323. [3] 吴冲龙,毛小平,王燮培,等.三维油气成藏动力学建模与软件开发[J].石油实验地质,2001,23(3):301-311. [4] 田宜平,袁艳斌,李绍虎,等.建立盆地三维构造-地层格架的插值方法[J].地球科学——中国地质大学学报,2000,25(2):191-194. [5] 毛小平,吴冲龙,袁艳斌.三维构造模拟方法——体平衡技术研究[J].地球科学,1999,24(6):505-508. [6] 翁正平, 吴冲龙, 毛小平,等. 基于平面图的盆地三维构造-地层格架建模技术[J].地球科学——中国地质大学学报, 2001, 16(增刊):135-138. -
计量
- 文章访问数: 818
- HTML全文浏览量: 112
- PDF下载量: 452
- 被引次数: 0
下载:
苏公网安备32021102000780号