塔河油田复合射孔穿隔夹层剩余油挖潜技术

Tapping of remaining oil in compound perforating interlayers in Tahe Oilfield

1.
Engineering Technology Institute of SINOPEC Northwest Company, Urumqi, Xinjiang 830011, China
2. Research Institute of Petroleum Exploration and Production, SINOPEC Northwest Company, Urumqi, Xinjiang 830011, China

摘要: 为解决钻井轨迹偏离油层,常规射孔穿深不足于穿透隔夹层,剩余油开采难问题,研究了多级复合火药深穿透射孔技术.为了封堵出水层段,在射孔炮眼环境下进行了机械卡堵水实验.精细解释隔夹层,优化多级火药配置及装药量,现场应用一口井,达到了射穿隔夹层沟通剩余油的目的,并有效封堵了出水层段,为塔河油田三次采油剩余油挖潜提供了思路.
- 复合射孔 /
- 机械卡堵水 /
- 隔夹层 /
- 剩余油 /
- 塔河油田
Abstract: In conventional perforations, drilling path often deviates from reservoirs, and drilling depth is not enough to penetrate interlayers. In view of the difficulties of remaining oil tapping, a new perforating technique with gunpowder was innovated. To seal water, mechanical water plugging experiments were made under perforating hole environments. The technique was applied in one well with the fine interpretation of interlayers and the optimization of gunpowder. The interlayers were perforated through and the remaining oils were exploited, providing a new idea for tertiary oil recovery in the Tahe Oilfield.
- compound perforation /
- mechanical water plugging /
- interlayer /
- remaining oil /
- Tahe Oilfield

[1]	付国民,赵俊欣,杨磊,等.塔河油田9区三叠系中上统高分辨率层序地层及沉积演化[J].兰州大学学报:自然科学版,2007,43(3):13-17.
[2]	陈东波,徐刚,苏鹏,等.复合射孔工艺在塔河油田的应用[J].长江大学学报:自然科学版,2014,11(14):50-51.
[3]	刘会娟,刘荫忠,田毅,等.复合射孔爆炸与燃烧机理数值模拟分析[J].测井技术,2012,36(1):78-83.
[4]	沈晶鑫,成建龙,刘荫忠,等.内置式复合射孔装药量优化设计[J].测井技术,2011,35(1):75-78.
[5]	陶亮,艾晓莉.复合射孔数值模拟的准确性验证及其应用展望[J].测井技术,2007,31(1):45-49.
[6]	张国按,孙志明.高能复合射(FracGun)在国外A油田的应用[J].石油钻探技术,2006,31(1):62-64.
[7]	项忠华.射孔压裂参数优化设计研究.北京:中国石油大学,2002.
[8]	吴飞鹏,蒲春生,陈德春,等.高能气体压裂合理装药量的设计与应用[J].石油钻探技术,2009,37(1):80-82.